High trapping fume eliminator

Above 96.5% smoke collecting rate, above 95% particle eliminating rate, its efficiency of raw oil collecting is obvious.

1. It is more convenient to operate by separating the IC & Power System with the Electrostatic Host, which can avoid vapor, oil, mist and other pollutants into the IC & Power System that may cause the damage.
2. With functions of one-click start and stop, this simple control design makes the operation and maintenance easier and more convenient.
3. Fault alarm system and instant display functions can show the running status of the equipment at any time.
4. Using frequency power supply makes the output more stable, efficiency higher and the life cycle longer.
5. With multiple discharge protection function, if there is discharge phenomenon in honeycomb filtering cells, the system will stop the working equipment and send an alarm.
6. With short circuit protection function, if there is short circuit in honeycomb filtering cells, the system will reduce the output power is low and stop the working equipment and send an alarm.

High trapping dust extraction systems air - door type suction fume eliminator

The main machine of central type dust cleaner is connected to the suction working bench installed at the lower part of cutting machine by pipe. This working bench is divided into several chambers with the same width. An air door linked with cylinder is installed at one side of the chamber .The air door corresponding to the position the cutting machine moves to may be opened automatically through inductive switch, and dust generated during cutting will be sucked into air passage, and enter into the central type main machine for final cleaning.

It may be divided into single-side door type, double –side door type and four-side door type according to the width of cutting platform.
 

Characteristics:

1. Large effective cutting width for bench.

2. High trapping efficiency of dust

3. Easy dust cleaning

Commercial kitchen Electrostatic Precipitator

GESP Series- Commercial Kitchen Fumes Purification Device applys to the kitchen. The function of the device is to purify the cooking fumes and oil when you are cooking. And the fumes removal rate can reach over 98.7%.

How it works?

Electrons are emitted from cathode in high-voltage electric field,and then in the process of electrons collision with air molecules, the anions are generated in order to capture the soot particles. So the soot particles are charged. Under the electric field, those charged soot particles are absorbed by anode so as to achieve the goal of removing the fumes.

Why choose us ?

1) Owinga professional team of serving users and ofhaving rich practical experiences for many years.

2) Quality controlled: Our engineer will test the equipment for many timesbefore loading.

3) Processing technology: The shell adopted laser cutting, CNC bending, stamping technology make sure the precision of the equipment.

4) Electric partsare import parts. These ensure the steady performance and excellent quality of the equipment systems.

5) Supply OEM service according to customers' requests and give out professional suggestions.

6)Distributors offer : Welcome to be our distributor or agent.

Technical Advantages

	Stable Transformer Technology Adopting adjustable epoxy high voltage power with strong output power guarantees the equipment could achieve extremely high processing efficiency and years of stable operation.Its current intensity can be adjusted according to fume concentration.
	Intelligent Operating System With functions of one-click start and stop and the straight pipe operation display, make the equipment’s operation and maintenance more simple and convenient.
	Safe Control System With multi-functions of electrical discharge shutdown, short-circuit protection, arc suppressing protection and over-temperature protection,ensure the security of the equipment.
	Creative Electrostatic Field Cell The pioneered filtering module in the industry of whole stainless steel with bilateral cathode fixed technology makes the equipment more stable and easier to clean.
	Housing Electric Connecting Way Adopting the housing electric connection way that makes the installation very simple and it can be used only need to connect the power line. The built-in wire slot structure prevents the security risks caused by the exposed wiring gets old.

Product Information

Quality control:

100% of the electrostatic precipitator will be tested and keep working for 72 hours to test its formal operation. Each component should pass all these QC procedures before shipping to customer.

Trade Terms:

1) Payment: T/T, L/C.

2) Payment terms: By T/T, 30% as deposit, and 70% should be paid before loading.

3) Delivery term: Within 60 days after received payment.

4) MOQ: 1 set.

Our services:

1.For all your inquires about us or our products, we will reply you in detail within 24 hours.

2. We own well-trained and passionate sales & after-sale services. If you have questions, please don’t hesitate to contact us.

3. Our equipment has different airflow, and the equipment’s color can be customized by your needs.

4. We ensure that the quality of the electrostatic precipitator is good, qualified and safe, and we offer technology guidance.

Company Information:

Factory Views

Boton Air Technology was set up in Foshan city, Guangdong province. We are specialized in manufacture air pollution control system including commercial kitchen electrostatic precipitator and industrial electrostatic precipitator for more than 10 years. And I hope you will like them.

FAQ:

1.Q: Are you a factory or trading company?

A: We are the honest, serious and skilled manufacturer in China, and our engineering team has been involved in the electrostatic precipitator business for more than 10 years.

2.Q: Where is your factory located? How can I visit there?

A: Our factory is located in Foshan, Guangdong province, China, and it is not far away from the metro, actually just 15 minutes arriving here. Welcome you come to visit us.

3. Q: What is the raw material of your equipment?

A: The cover is made from steel A3 sheet, and the electrostatic honeycomb cell is made from whole stainless steel.

4 Q: How can I get the free sample units?

A: Sorry, the sample units needed to be paid.

5.Q: How does your factory do regarding quality control?

A: Quality is priority. My company always pays attention to quality controlling from the very begging to the very end. Please don’t worry to use our equipment.

6.Q: How to be the agent of your company?

A: If you have interests to be our agent, please feel free to contact us,and we are glad to provide detail information.

If you are still unclear about every details to start business with us, please do not hesitate to contact us. We are always to working with you.Thanks.

Laser Dust Smoke filter , 450W Laser Engraving Filter System , Laser Fume Extractor

Specifications:

Description:

1.,with specially designed welding hoods, flexible suction effectively direct addition to welding smoke, convenient and safe, improve the working environment, protect the health.

2 advanced motor design, air volume, low power consumption, durable, can work;

3.Electronically controlled using an overcurrent protective device High safety;

4.Carbon Fiber filter element filter, filtration and permeability abnormalities prominent and beautiful appearance, easy installation, low cost, easy to clean, filtered over an area of 20 M2, efficiency of 99.97%, particle size can be captured dust than 0.3μM;

5.Activated carbon filter plate can effectively remove the odor;

6.Blower airflow using the grill vents diversion, and the inner wall has a sound-absorbing cotton, noise to a minimum;

Applications:

Our line of floor, bench top, mounted and portable units serve a variety of applications including welding, soldering, manufacturing, laboratory and pharmaceutical operations. Waterun Technology Co.,Ltd manufacturing a variety of high quality air purification systems for filter the harmful substances. Don’t despair if you don’t see your application listed below. Our modular product line can be configured in a number of different ways to address your specific requirements.Contact us today to find out the solutions!

Competitive Advantage:

1. Our company uses a brushless motor, compare with the ordinary motor, this motor speed is higher, lower noise, it does not require maintenance, but longer product life span.

2. Self-developed impeller, better quality than ordinary plastic impeller, more stable, more powerful suction. The unique tiered filter design, can effectively purify the toxic and harmful substances in the air, such as formaldehyde, benzene, ammonia, radon gas, sulfur dioxide..etc, and use of low cost.

3. Compared with the products from foreign countries, our products in terms of the effect is almost the same, but the majority of our products are less than USD2000, so our products are cost-effective, and the use of more affordable cost.

4. The products from abroad mainly purify the viruses and bacteria as the main direction of governance. In China not only to purify viruses, bacteria, but also clean harmful smoke pollution. WHO estimates that there are over 200 million people deaths each year due to inhalation of indoor and outdoor air pollution in small particles.

5. A winning design, with multilayer filters which can minimize the harm. Stable performance make sure the machine have a long life.

FQAs:
 

1. What is Laser Fume?

Answer: Lasers are now an essential tool in industry for cutting, marking, engraving and welding a vast range of materials. Metals are the most commonly worked substrate but organic materials (plastics, paper, wood) are catching up fast.

Most of the particles are spherical and roughly 90% by weight are less than 1µ in diameter. These particles fall within the respirable range and need to be removed from the working environment to prevent bronchal or lung damage.

2. What’s the advantage compare with ducted exhaust fan?
Answer: 1. Many advantages like (1) Clean the air quality (2) energy saving (3) easy installation, flexible remove (4) low cost (5) reduce the incidence of diseases and major diseases, and health is priceless (6) to reduce unpleasant  smell (7) to reduce dust and other harmful substances, and so on.
 

3. What’s the life span of our fume extractor?
Answer: Motor lifetime is (continuous working 24 hours) 20,000 hours, consider environmental factors. Usually it can use 4-5 years without any problems.

Advanced Clogging Filter Alarming Fume Extraction System for Laser

Specifications:

Features:

1. Our F3000D fume extractor is specially designed for industrial welding fume and light weight particles, can be widely applied to many places that produce dust and oil fume and industries such as electronic wave soldering, metal processing, laser cutting, etc.

2. It is equipped with wheels for movment and station.

3. This kind of machine has incomparable disposal efficiency: at rated air volume, the welding fume elimination efficiency is above 99.97%, thus can discharge directly in the workshop.

4. the laser fume extractor has automatic detection and malfunction diagnosis function.

5. The machine is easy to operate and maintain.

6. PP filter is for filtering dust particles above 0.3μm, its filtering efficiency reaches 99.97%

    Glass fiber filter is for filtering dust particles above 0.3μm, its filtering efficiency reaches 99.97%

    Active carbon fiber is forfiltering the harmful gases with the filtering efficiency as high as above 95%

Applications:

Our line of floor, bench top, mounted and portable units serve a variety of applications including welding, soldering, manufacturing, laboratory and pharmaceutical operations. Waterun Technology Co.,Ltd manufacturing a variety of high quality air purification systems for filter the harmful substances. Don’t despair if you don’t see your application listed below. Our modular product line can be configured in a number of different ways to address your specific requirements.Contact us today to find out the solutions!

FQAs:
 

1. What is Laser Fume?

Answer: Lasers are now an essential tool in industry for cutting, marking, engraving and welding a vast range of materials. Metals are the most commonly worked substrate but organic materials (plastics, paper, wood) are catching up fast.

Most of the particles are spherical and roughly 90% by weight are less than 1µ in diameter. These particles fall within the respirable range and need to be removed from the working environment to prevent bronchal or lung damage.

 
2. What’s the advantage compare with ducted exhaust fan?
Answer: 1. Many advantages like (1) Clean the air quality (2) energy saving (3) easy installation, flexible remove (4) low cost (5) reduce the incidence of diseases and major diseases, and health is priceless (6) to reduce unpleasant  smell (7) to reduce dust and other harmful substances, and so on.
 

3. What’s the life span of our fume extractor?
Answer: Motor lifetime is (continuous working 24 hours) 20,000 hours, consider environmental factors. Usually it can use 4-5 years without any problems.

High-Efficiency Welding Solder Fume Extractor with Digital Display

 
Specifications:
 

 
Description:
 
1.The fume extractor is installed with brushless motor which ensures low noise, stable performance

2.The ducts of fume extractor can be bent or lengthened as desired and maintain the shape. 

3.The fume extractor is intergraged boday desigin, structured with metal framework, and prodcessed with electrostatic spraying for premium cold-rolled-steel sheet

4. The fume extractor filter layers are portable and replaceable, reduct the production cost, easy to operate and durable.

5. We have been selling a good quantity of our solder fume extractors to Germany, Israel, UK and a few other European countries. And we got quite good and positive feedback from them on the quality and performance of our products.

6. We make really effective fume extractors only which are widely used in the process of soldering, laser marking & carving, printing, etc.

 
Features:
 
1.With the intelligent control panel and digital display, the operation becomes easy and simple. By pressing the button, you can freely adjust the air volume and set the working time,. you can achieve real-time monitoring on the working status.

2.Ducts can be bent or lengthened as desired and maintain their shape after adjustment, letting you place them exactly where suction is needed.

3.The High-voltage and large-volume brushless motor, ensure low vibration, low noise, stable operation. and long life span.

4.Equipped with the remote control, the operator can control the machine from a distance.

5.With the truly sensitive and effective "Filter Clogging Alarm System". When the filter gets saturated and clogged, the machine will give sound and light alarms within 20 seconds. It notifies the operator to replace the filter in time, to guarantee a comfortable working environment.

6.The machine surface is made of metal, more corrosion resistance and durable

7. With square absorbing hood which have bigger filter area

8. Provide trundle with brake, easy to move castors

 
Applications:
 
Waterun Technology Co.,Ltd manufacturing a variety of high quality air purification systems for filter the harmful substances. Our line of floor, bench top, mounted and portable units serve a variety of applications including welding, soldering, manufacturing, laboratory and pharmaceutical operations.Don’t despair if you don’t see your application listed below! Our modular product line can be configured in a number of different ways to address your specific requirements.Contact us today to find out the solutions!
 

 
Competitive Advantage:
 
Our company uses a brushless motor, compare with the ordinary motor, this motor speed is higher, lower noise, it does not require maintenance, but longer product life span. Self-developed impeller, better quality than ordinary plastic impeller, more stable, more powerful suction. The unique tiered filter design, can effectively purify the toxic and harmful substances in the air, such as formaldehyde, benzene, ammonia, radon gas, sulfur dioxide..etc, and use of low cost.

Compared with the products from foreign countries, our products in terms of the effect is almost the same, but the majority of our products are less than USD2000, so our products are cost-effective, and the use of more affordable cost. The products from abroad mainly purify the viruses and bacteria as the main direction of governance. In China not only to purify viruses, bacteria, but also clean harmful smoke pollution. WHO estimates that there are over 200 million people deaths each year due to inhalation of indoor and outdoor air pollution in small particles.

 
FQAs:
 
1. What’s the functions for the filters?
Answers. 1) Pre-Filter/F8 pre-filter: the large-size pad filter can filter large particles of dust (according the requirement to select pre-filter or F8)
2) PP Middle Filter/Fiber glass filter: it filters the middle-size, small size particles bigger powders for prolonging the main filter's life. (according the requirement to select PP middle filter or fiber glass filter,can use both, the efficiency better.)
3) Main Filter/Active carbon: it cleans harmful particles and fumes.
4) High efficiency filter(combine middle filter and active carbon filter): it can filter about 0.3micron particles and other harmful fumes.
 
2. What’s the advantage compare with ducted exhaust fan?
Answer: 1. Many advantages like (1) Clean the air quality (2) energy saving (3) easy installation, flexible remove (4) low cost (5) reduce the incidence of diseases and major diseases, and health is priceless (6) to reduce unpleasant  smell (7) to reduce dust and other harmful substances, and so on.
 
3. The ducts for the fume extractor can be shortened or lengthened?
Answer: It can be shortened or lengthened appropriate; but we suggest not more than 1.5meter. For multi-station, the total pipe length should not exceed 10 meters.
 
4. What’s the best distance between the nozzle and the smokes?
Answer: The distance to be 5-15cm is the best.
 
5. How long need to to replace the pre-filter, middle filter and the main filter?
Answer: 1. Pre-filter : normally needs to replace by 1 months
             2. Middle filter: normally needs to replace by 3 months
             3. Main filter: normally needs to replace by 6 months.
 
6. Bent pipe will affect smoke purify?
Answer: Yes, it affect the suction power, it should reduce the bent rate.
 
7. Can our fume extractor completely filtered poison gas?
Answer: No, there still no any kind of filter can filter out 100% of poison gas, but you can make a different filter net rate upon request.

8. What’s the life span of our fume extractor?
Answer: Motor lifetime is (continuous working 24 hours) 20,000 hours, consider environmental factors. Usually it can use 4-5 years without any problems.

 
Brushless High Power Industrial Fume Extractor for Laser Cutting and Printing
 
 
Specifications:

 
 
Description:
 
F5000D fume extraction systems effectively remove the fumes generated in many electronics manufacturing processes.Applications include solder smoke removal, reflow ovens, wave soldering, plasma cutting, conformal coating fumes and cleaning solvent fumes. These efficient and economical fume extractors are easy to install, reliable and safe. 

 
Features:

1. Integrated structural design of smoke filtration, easy for installation, mobile flexibly, not requiring a fume suction pipeline.
2. Single or Double-station design, adjustable air flow, directional air control adjustment, positioning with ease.
3. High-power brushless DC motor, long life, low noise, a large air flow.
4. Triple fume filtration design ensure to totally filter out hazardous substances, protect the security of human. Initial filter, medium filter and main filter can be replaced individually, to make full use of filters to reduce the production cost.
5. Built-in smoke filtration cycle design avoid expeling indoor cold/heat air outside.
6. Multi-position design, adjustable air flow, flexible suction arm adjust freely.
7. Low noise design

Attention

• Don't block air inlet and outlet when using the machine.
• When replacing filter,please make sure sealing ring, pull clasp, smoking pipe install closely to prevent air leakage.
• Keep smoke hood surrounding air flow velocity in the minimum.
• Make sure all pull clasp fasten when moving the machine.
• Regular checking and replacing pre-filter,middle filter and main filter to avoid purifier blockage then cause equipment damage.
• Please use the original filters and accessories, to avoid affecting the service life and the purification efficiency of the equipment.
• Keep the distance between air inlet and smoke source point within 15 cm.
• Don't use the product in high temperature and high humidity, flammable and explosive occasions.
   

Applications:
 
Our line of floor, bench top, mounted and portable units serve a variety of applications including welding, soldering, manufacturing, laboratory and pharmaceutical operations. Waterun Technology Co.,Ltd manufacturing a variety of high quality air purification systems for filter the harmful substances. Don’t despair if you don’t see your application listed below. Our modular product line can be configured in a number of different ways to address your specific requirements.Contact us today to find out the solutions!

 
 
Competitive Advantage:

1. Professional technician, which make sure the machine perfect. After serveral update, our machine can be operated more easilier .and the surface is safety and anti-acid.
 
2. Our company uses a brushless motor, compare with the ordinary motor, this motor speed is higher, lower noise, it does not require maintenance, but longer product life span.
 
3. The products from abroad mainly purify the viruses and bacteria as the main direction of governance. In China not only to purify viruses, bacteria, but also clean harmful smoke pollution. WHO estimates that there are over 200 million people deaths each year due to inhalation of indoor and outdoor air pollution in small particles.
 
4. Compared with the products from foreign countries, our products in terms of the effect is almost the same, but the majority of our products are less than USD2000, so our products are cost-effective, and the use of more affordable cost.