Industrial Cyclone Dust Collector , Cyclone Dust Extraction 3000 M3/ h to 60000 M3/h

Industrial Cyclone Dust Collector , Cyclone Dust Extraction 3000 M3/ h to 60000 M3/h

Cyclone  dust collector  for welding fumes metal grinding / sawing / sanding / polishing .

We customize desgin and produce  for different gas working condition and different type of gas pollutions .Here , introduce our  sigle baghouse dust collector for general dust source in process of polishing , sanding , grinding , milling , sawing , etc . The air flow is usually from 3000 M3/ h to 60000 M3/h.

Brief Introduction :

ECOGRACE pulse jet dust collector Filter Unit is generally with smaller air flow from 2000 M3/H to 60000 M3/H , which is small in outside dimention , and we will design the most reasonable dimention for easy container loading and shipping , no need more installatino work at production site . It will be assembled in whole and put into the container , you can directly start when take out from container .

Dust Collector  technical specification :

Working Principle of  dust collection systems  :

1. The compostion of small dust collector unit  :

Assmebled Filter Unit ,  Fan , PLC , air compressor . Rotary dust discharging.

2. The filter  cleaned  by solenoid valve pulse.  ASCO and GOYEN is the regular band we take .

3. Filter cage  and filter bag will be fit in the assembled baghouse . 

4. Good and reasonable design for the hoods and capacity of dust collector will reach a very different working result for the steel plant induction furnace . 

Advantage of ECOGRACE dust collector Filter Unit :

1. Easy operation maintenance.

2. Assembled when EX work from our factory and no more  intallation work needed.

3. High filtration efficiency up to 99.99% , low  emission < 30 mg/ M3.

4. Energy saving 

5. Lower system resistance up to < 1000 pa.

6. ECOGRACE self made fabric filter bags will be with free replacement in 3 years. 

ECOGRACE project show :

Production and shipping  :